Advertisement
Installation Location
●
The devices are suitable for wall installation.
●
Recommended height: 5 feet above the floor.
●
Do not install the devices in recesses, shelves, behind curtains or doors, or above or
near heat sources.
●
Avoid direct exposure to sun and drafts.
●
Seal the conduit or backwall as drafts can affect sensor readings.
●
Observe maximum ambient conditions.
Wiring
Use only class 2 rated power source with proper current limiting.
Installation
Thermostat may be mounted directly on wall using drywall anchors and screws (included).
For installation on a 2" × 4" conduit box , use the appropriate mounting plate and plastic trim
piece (included).
No user serviceable parts inside.
Risk of fire and injury due to short-circuits
●
Use properly sized wires for connections
Commissioning
Refer to the Quick guide and User guide (see Product Documentation [➙ 6]) to configure
your device. Commissioning includes the following:
●
Internet connection
●
Application setup
●
Account registration and device pairing
NOTE: Before configuring your thermostat, make sure you have Internet connection, a valid
email address, and a smartphone.
Operation
Operating System
Siemens Industry, Inc.
Smart Infrastructure
WARNING
7
A6V11727385
06/20/2019
Advertisement
