prime3 APS21 Owner's Manual page 5

APS21
b. Recharge and store the unit within the temperature range of
5°C~35°C (40°F~95°F).
c. Do not charge longer than 24 hours. Excessive charging or discharging may shorten the battery's life.
d. Battery life naturally shortens slowly over time.
e. Please turn off the speaker if long time not to use. f. he speaker can play music during charging.
g. Due to prolong charging and discharging, the unit battery life will be affected and playback time will also
be shortened. We cannot guarantee the same playback consistently throughout and this is not include in our
warranty and service.
Bluetooth operation
The speaker includes Bluetooth function which allows you to wireless playback the audio with other
Bluetooth device like smart phone etc. Please follow up below for the operation:
1. Power on the unit by using "Power button" on the rear panel of the device. The "Blue" writing on the display
will flare quickly which means the speaker is ready to pair with other device.
2. Enable the Bluetooth function on your Bluetooth device, and search the available Bluetooth device (please
reference your device manual for the operation).
3. Check the available Bluetooth device on the menu list of your device, and select " P3_XPLODE" in order to
start pairing. Please key-in "0000" (4 zero) in case of a password required during pairing. The "Blue" writing
becomes stable when the pairing is successful.
4. Select and play the music on your Bluetooth device. Then the sound will output from speaker.
5. During Bluetooth playback, use the external device or speaker controls to adjust volume or change files.
Notes:
a. All Bluetooth devices are not guaranteed to pair successfully due to different design and brand.
b. The Bluetooth best working distance is within 10 meters without any obstacle in between.
c. In case the speaker does not pair with other device successfully and no further operation, the speaker auto
off after about
10 minutes, please power on the unit again for operation.
FM radio operation
· Before listen to the radio, please try to move the unit next to the window as you can, and unwind the
antenna wire to get better reception.
· Power on the unit by pressing a switch on the rear panel of the device, and short press the Mode button to
enter FM radio mode.
· Short press the Play/Pause button to auto-scan and save the available FM station; short press it again to stop
scanning.
· Press Skip forward button to select next preset station.
· Press Skip backward button to select the last preset station.
· In FM mode, you can press Mode button to switch to a different source.
· Switch off the device by pressing the switch on the rear panel of the unit, once you finished using it.
AUX IN
Using the Aux cable connect the AUX jack on the speaker rear panel with the line out or headphone jack on
any other external audio player like mp3 player etc. Power on the speaker and short press the Mode button to
enter the AUX IN playback mode; select and play the music from your external audio player, then the sound
will output from the speaker.
Notes:
· In AUX IN mode, the main control is on your external audio player side. But you still can increase or decrease
the volume or change files on the speaker side.
5