Warning; Set-Up Instructions; Your New Water Bath Includes The Following; Unpacking Your Water Bath - Whitehall SP-1600-A-B Instructions For Operation And Care Of

Skills:
Operators using the Water Bath need a working
knowledge of occupational therapy procedures.

WARNING

WARNING
! !
Only trained personnel should operate the Water Bath.
Untrained operators can cause injury or be injured.
This Whitehall product has been carefully packaged at
the factory to minimize the possibility of damage during
shipping.
— Inspect the packaging for external signs of
damage.
— Inspect the contents for damage.
If there is visible damage to the instrument upon receipt,
inform the shipping company and Whitehall immediately.
WARNING WARNING
! !
Do not attempt to operate this equipment if there is
evidence of shipping damage or you suspect the unit
is damaged. Damaged equipment may present
additional hazards to you. Contact Whitehall technical
support for advice before attempting to plug in and
operate damaged equipment.

1. Your new Water Bath includes the following:

(1) Heating Appliance
(1) Power Cordset
(1) Operation & Maintenance Manual
NOTE: If you are missing any of the above,
contact WHITEHALL MANUFACTURING
toll free telephone no. (800) 782-7706 or (626) 968-6681

2. Unpacking your Water Bath

Remove all shipping & packaging material. Remove all
items from inside of tank such as Power Cordset,
Warranty Registration Card, and Operation &
Maintenance Manual.
WHITEHALL MANUFACTURING • P .O. BOX 3527 • City of Industry, CA 91744-0527 U.S.A
Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallmfg.com
Instructions for Operation and Care of Water Bath SP-1600-A-B
OPERATOR SKILLS AND TRAINING
INSPECTING THE WATER BATH

SET-UP INSTRUCTIONS

Training
Operator trainees need to:
Ÿ
be trained in occupational therapy protocols.
read and understand this manual.
Ÿ
Inspection Checklist
Ÿ
Is the Water Bath free of excessive wear?
Ÿ
Is a properly-grounded and voltage-matched
receptacle available?
Ÿ
Is the outlet equipped with a functioning GFI?
Ÿ Does the drain valve open and close properly?

3. Location of your Water Bath

Place the Water Bath at a convenient height & location
such as on a table or scratch-resistant counter top.
IMPORTANT: Appliance must be placed on a level
surface! Water Bath must be positioned so to allow ease
of disconnecting Power Cordset if necessary.
3