Whitehall SP-1600-A-B Instructions For Operation And Care Of page 2

!
Failure to follow these instructions could result in damage
to your new heating appliance and/or injury
European Union CE Mark
The presence of the CE Mark on Whitehall equipment means that it has been designed, tested and certified as complying
with all applicable European Union regulations and recommendations.
Waste Electrical and Electronic Equipment (WEEE)
This symbol on the product or on its packaging indicates that this product must not be disposed of with regular waste. Instead,
it is the user's responsibility to dispose of waste equipment according to the local laws. Separate collection and recycling of
the waste equipment at the time of disposal will help conserve natural resources and ensure it is recycled in a manner that
protects human health and the environment. For information about where the user can drop off the waste equipment for
recycling, please contact your local waste collection authority. See Page 11 for instructions on how to disassemble the
equipment for recycling purposes.
Electric Shock
The Electric Shock Symbol is used to indicate a hazard arising from dangerous voltage. Any mishandling could result in
irreparable damage to the equipment and/or personal injury or death.
General Warning or Caution
The Exclamation Symbol appears in Warning and Caution statements. This symbol designates where personal injury or
damage to the equipment is possible.
To avoid electric shock, connect the instrument to properly earth-grounded, GFCI protected, 3-prong
receptacles only. Failure to observe this precaution can result in severe injury.
Ÿ
DO NOT operate the appliance without properly filling with water. Under no circumstance should the appliance be
operated without water, as operating the appliance without water may result in damage to the heating element. Appliance
must be unplugged while filling or emptying water.
Ÿ
CONNECT the appliance into a properly polarized G.F.C.I. (Ground Fault Circuit Interrupter) electrical receptacle for
protection against electrical shock. Have a qualified electrician verify the wall socket is properly polarized and grounded.
Use only the power cordset provided with the unit. The Water Bath appliance must be properly grounded.
Ÿ AVOID skin contact with HOT water at all times! Carefully place splinting material into the Water Bath appliance to avoid
splashing onto skin or coming into contact with HOT water. DO NOT reach into HOT water with bare hands to remove
heated splint material. Use a grasping device, such as tongs, to remove splint material from HOT water.
Ÿ DO NOT use in the presence of flammable liquids or gases, as these may present a fire and/or explosion hazard.
Ÿ
ALWAYS allow the appliance to cool down before draining water or moving unit.
Ÿ DO NOT use the lid handle to lift or transport appliance.
Ÿ
NEVER leave appliance operating unattended for long periods of time. Water can evaporate and cause appliance to over-
heat which may result in damage to the heating element. Turn "OFF" when not in use.
Ÿ
FOLLOW splint material manufacturer instructions for proper material heat-up temperature and duration.
a
WHITEHALL MANUFACTURING • P .O. BOX 3527 • City of Industry, CA 91744-0527 U.S.A
Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallmfg.com
PLEASE READ THIS ENTIRE
BOOKLET BEFORE OPERATING
YOUR NEW WATER BATH
WARNING
!