Flow Chart (Air-Cooled); Flow Chart (Water-Cooled) - Beko DRYPOINT RS 25-1010 HP50 Instructions For Installation And Operation Manual

11.3 Flow chart (air-cooled)

11.4 Flow chart (water-cooled)

1 Heat exchanger group
a – Air/air heat exchanger
b – Air/refrigerant heat exchanger
c – Condensate separator
Refrigerant pressure switch LPS (P<)
2
(RS 810-1010 & RS 320-1010 3phase)
Safety temperature switch TS (RS 320-1010 & RS
3
320-1010 3phase)
4 Refrigerant pressure switch HPS (P>)
6 Refrigerating compressor
7 Hot-gas bypass valve
8 Condenser (air-cooled)
9 Condenser fan (air cooled)
Compressed-air flow direction
DRYPOINT® RS 25-1010 HP50
10 Filter dryer
11 Capillary tube
12.1 T1 temperature sensor (dew point)
12.2 T2 Temperature sensor (fan control) (RS 25-70)
13 Condensate drain shut-off valve
18 Condenser (water-cooled)
19 Cooling-water regulating valve (water-cooled)
20 Liquid collector (water-cooled)
21 BEKOMAT condensate drain
Compressor crankcase heater (RS 320-1010
25
3phase)
Pressure transducer
37
(RS 90-1010 & RS 320-1010 3phase)
Refrigerant gas flow direction
Technical description
29