Philips HR1369 Manual page 9

preparing for use
There are two ways to install the charger:
1 Mount the charger on the wall, close to a socket. (Fig. 2)
2 Place the charger on the worktop.
charging
Charge the hand blender:
- before you use the appliance for the first time, or
- when the blue charging light flashes to indicate that the batteries
are low.
1 Put the adapter in the wall socket.
2 Put the motor unit in the charger. (Fig. 3)
The charging light flashes blue slowly to indicate that the appliance
,
is charging (Fig. 4).
Note: The adapter feels warm during charging. This is normal.
- It takes 4 hours to fully charge the appliance.
- Charge the appliance for at least 15 minutes to use it for a light
blending job (soup, puree).
3 You can place the blender bar in the charger next to the motor
unit (your blender bar may differ from the one shown in the
figure). (Fig. 5)
charging light indications
charging
When the appliance is charging, the charging light flashes blue slowly.
Batteries fully charged
When the batteries are fully charged, the charging light lights up blue
continuously.
Batteries low
When the batteries are low, the blue charging light flashes. The lower the
energy level in the batteries, the faster the charging light flashes.
EnglisH
9