Table of Contents
Advertisement
Using the Miscellaneous Menu
You can synchronize data, read reference information, change settings, and play
games using the Miscellaneous menu.
Connecting Your Unit to a PC
Data communication requires a PC running Chinese Windows (95 or 98) and
Data Link for Windows. DataGuard® is optional. You also need the appropriate
serial cable. To connect your unit to a PC, follow these steps.
1. Turn the unit and the PC off.
2. Plug the 3-pin end of the serial cable into the Data Link port on the unit.
3. Plug the 9-pin end of the serial cable into the communciation port
(COM1 or COM2) on the PC.
Make sure the cable is securely attached. If the port is not compatible with the
cable, you will need an adapter.
4. Turn the unit and the PC on.
5. Start the Data Link application on your PC.
Transferring Data to a PC
1. From the Miscellaneous menu on your unit, highlight DataComm and
press
.
ENTER
2. Highlight All and press
databank.
The unit displays all sections of the databank.
3. Press
to begin transferring data.
ENTER
When the data transfer is complete, the message Transfer Finished appears
on the screen. You can view the data in the Data Link application on your PC.
Note: You can also transfer an item or a record of data. When transferring an
item, you must choose the Databank item you want. For example, you can
transfer the contents of the Memo only. When transferring a record, you must
choose the Databank item and the record you want. For example, you can
transfer a single record from the To Do list.
Receiving Data from a PC
• From the Data Communication screen, highlight Receive and press
The message Waiting for Reception appears. The amount of time it takes to
receive data depends on the number of records being transferred. When
transfer is complete, the message transfer finished appears on the screen.
to send all data records stored in the
ENTER
13
.
ENTER
Advertisement
Table of Contents
