Operating Vacuum Cleaner - LG VC3018 H Series Owner's Manual

Assembling vacumm cleaner
Carpet and Floor nozzle
(depending on model) (1)
Push telescopic pipe or dual pipe into the
nozzle outlet.
Telescopic pipe (depending on model)
(2) (5)
• Push the spring latch to release.
• Pull out the pipe to the desired length.
• Release spring latch to lock the pipe
in position.
Dual pipe (depending on model) (3)
Fit together the two pipes by twisting slightly
when choose dual pipe.
Carpet and Floor nozzle
(depending on model) (4)
Push the nozzle into the telescopic pipe.
Connecting the hose to the vacuum
cleaner (6)
Push the fitting pipe on the flexible hose into
the attachment point on the vacuum cleaner.
To remove the flexible hose from the vacuum
cleaner, press the button situated on the fitting
pipe, then pull the fitting pipe out of the vacuum
cleaner.

Operating vacuum cleaner

How to operate (ON/OFF type) (7)
• Pull out the power cord to the desired length
and plug into the socket.
• Press power switch to start the vacuum
cleaner.
• The flexible hose handle has a manual
airflow regulator which allows you to briefly
reduce the suction level.
• Press the cord reel button to rewind the
power cord after use.
How to operate (Rotary type) (8)
• Pull out the power cord to the desired length
and plug into the socket.
• Press power switch to start the vacuum
cleaner.
• Slide the rotary control knob to adjust the
suction level.
• The flexible hose handle has a manual air
flow regulator which allows you to briefly
reduce the suction level.
• Press the cord reel button to rewind the
power cord after use.
How to operate (Hose slide type) (9)
• Pull out the power cord to the desired length
and plug into the socket.
• Place the control knob of the hose handle
to the required position.
• To turn off, slide control knob to OFF
position.
• Press the cord reel button to rewind the
power cord after use.
Park mode (10)
• To store during vacuuming, for example to
move a small piece of furniture or a rug,
use park mode to support the flexible hose
and nozzle.
• Slide the hook on the nozzle into the slot
on the side of vacuum cleaner.
Storage (11)
• When you have switched off and unplugged
the vacuum cleaner, press the cord reel
button to automatically rewind the cord.
• You can store your vacuum cleaner in a
vertical position by sliding the hook on the
nozzle into the slot on the underside of the
vacuum cleaner.
Using carpet and floor nozzle
Carpet and floor nozzle (depending on
model) (12)
• The 2 position nozzle
This is equipped with a pedal which allows
you to alter its position according to the type
of floor to be cleaned.
• Carpet or rug position
Press the pedal to lift the brush up.
• Hard floor position (tiles, parquets floor)
Press the pedal to lower brush.
- 26 -