Power Blade Battery Pack - Jaco ULTRALITE 300 Series Manual

Input/output Connections, use only for stated connection:
NOTE: Controller board as viewed from inside Cart
Top Assembly, rear section
NOTE: Front Status Panel as viewed from
inside Cart Top Assembly, front section
Optional connection for
future additions
Estimated run‐time per Power Blade Battery Pack:
The JACO 300 Series Hot‐Swap Power Blade Battery Packs are designed to be a safe and reliable solution
for health care applications. As with any battery system, the amount of time that the battery will power
the equipment is dependent on the device (PC, Laptop, LCD Monitor...) power demand. To help reduce
power demand and increase the Power Blade Battery Pack runtime, we suggest that you set the monitor
to enter sleep mode after 5 minutes of idle time.
The following are estimated runtimes per JACO Power Blade Battery Pack, your results may vary.
13
Cat5 Cable to front Status Panel
Watts Hours
40 3
45 3
50 3
55 2
60 2
65 2
70 2
75 1
80 1
90 1
100 1
Power Inverter
Optional for Electronic Locking
Drawer System
Minutes
40
25
5
45
NOTE: Listed are the estimated
35
runtimes for a single JACO
12
Power Blade Battery Pack.
0
55
51
42
30
Cat5 Cable from
Controller Board