Selecting The Jam Mode [Jam Mode]; Setting The Pull Up/Down Function [Pull Up/Down] - Fostex FR-2 Owner's Manual

Tc card for the fr-2 field memory recorder

Hide thumbs Also See for FR-2:

Owner's manual (110 pages)

Specifications (2 pages)

Software update procedure (1 page)

Table Of Contents

Table of Contents

The [JAM Mode] menu items selects the jam mode when jamming external time code into the internal

time code. By default, both the time value and userbit of the external time code are jammed. How-

ever, you can change this setting to jamming only the time code value or only the userbit.

After bringing up the second page of the TC Setup menu, use the [MENU] dial to select "JAM

Mode" and press the [ENTER] key. The current jam mode (by default, "TC&Ubit") starts flashing

and you can now make selection.

Use the [MENU] dial to select a desired mode and press the [ENTER] key to confirm the selec-

tion. You can select from the following.

TC & Ubit

Both time code and userbit data are jammed (default).

Only time code data is jammed. For userbit, the userbit data of the internal generator is used.

Only the userbit data is jammed. For time code, the time code data of the internal generator is

UBIT

used.

The "Pull Up/Down" menu item selects pull up/down setting against the current audio sampling

frequency.

After bringing up the third page of the TC Setup menu, use the [MENU] dial to select "Pull Up/

Down" and press the [ENTER] key. The current pull up/down option (by default, "0.0%") starts

flashing and you can now select the desired option.

Use the [MENU] dial to select a desired option and press the [ENTER] key to confirm the selec-

tion. You can select from among "0.0%", "+0.1%" and "-0.1%". The current selection is shown at

the bottom of the Home screen.

<Note>: You cannot select "+0.1%" or "-0.1%" while the frame rate is set to 25 fps. See the

table below for the actual frame rate when the pull up/down function is active.