Unpacking; Standart Package Of Components; Place Requirements; Mounting - Salda RIRS 400 V EKO 3.0 Series Mounting And Installation Instructions Manual

10. UNPACKING

Accessories may be packed together with the product. Prior to transporting the unit, first unpack the accessories.
• Remove the film from the unit.
• Remove the bracing packaging tape which keeps the protective profiles.
• Remove the protective profiles.
•After unpacking the unit, examine it to make sure that it it has not been damaged during transportation. The installation of damaged units is
prohibited!
• Verify that all ordered equipment are delivered before starting the installation. Any deviation from the ordered equipment must be reported to the
supplier of products.

11. STANDART PACKAGE OF COMPONENTS

400 VER
KEY 291103 1

12. PLACE REQUIREMENTS

L
1,5xL

13. MOUNTING

The protective film is intended to protect the unit during transportation. It is recommended to remove the film because other-
wise oxidation signs may occur.
Before every heating season the condensate tube shall be filled with water as indicated during the first startup!
RIRS 400-700 V EKO 3.0 v2019.06
400 VEL 400 VWR
1 1
1,5xL
Min. distance to open the door - 1,5xL; Min. distance to open control box door - H > 400 mm.
RIRS EKO 3.0
400 VWL 700 VER
1 1
L
400mm
700 VEL 700 VWR
1 1
H
700 VWL
1
EN | 7