Trane Flex II Series Installation Operation & Maintenance page 6

snow, fog etc.
The following precautions should also be taken at all times:
never dispose of fluids contained in the refrigerant circuit into the environment.
•
when replacing the electronic card always use appropriate equipment (extractor, anti static bracelet, etc.).
•
if a compressor, the evaporator, the condensation batteries or any other heavy part is to be replaced, make sure that
•
the lifting equipment matches the weight to be lifted.
if the unit has an independent compressor compartment, do not open the ventilator compartment without having
•
first isolated the machine using the knife switch on the side of the panel and only after having placed a sign which says
"do not use - maintenance in progress".
if modifications must be carried out to the cooling, hydraulic or electrical circuit of the unit, as well as to its
•
command logic, contact Trane.
if particularly complicated assembly or disassembly operations are to be carried out contact Trane.
•
always use original spare parts bought directly from Trane or from official dealers of the companies reported in the
•
list of recommended spare parts.
if the unit is to be moved after a year of being in the site or if it has to be dismantled contact Trane.
•
2.10 MANUAL ALARM RESET
If there is an alarm the unit must not be manually reset before having located and eliminated the cause of the fault.
Repeated manual resets may cause the guarantee to be annulled.
6