IMPORTANT SAFETY INSTRUCTIONS • Read instructions - All the safety and operating instructions should be read • Damage Requiring Service - Unplug this product from the wall outlet and refer before the product is operated. servicing to qualified service personnel under the following conditions: •...
- www.bluesound.com SAVE THE PACKAGING Please save the box and all of the packaging in which your B400S arrived. Should you move or otherwise need to transport your B400S, this is by far the safest container to do so. We’ve seen too many...
ATTENTION Please ensure that the B400S is powered off or unplugged from the mains power outlet before making any connections. It is also advisable to power down or unplug all associated components while breaking any signal or AC power connections.
Page 6
OFF. Switch from operating mode to standby mode: While at • At ON setting and with the +12V TRIGGER IN of the B400S operating mode, press and hold RESET button until the connected to compatible external equipment that is equipped illuminated blue LED status indicator turns off.
Page 7
+12V TRIGGER input. With +12V TRIGGER (ON/OFF) switch set to OFF, this output will be 12V when the B400S is at operating mode and 0V when it is at standby mode or powered OFF.
2 Compatibility to latest versions is subject to future software update. 3 Some features will be available via future software update. 4 Gross dimension include extended rear panel terminals Specifications are subject to change without notice. Check out www.bluesoundprofessional.com for updated documentation or latest information about B400S.
Page 10
A DIVISION OF LENBROOK INDUSTRIES LIMITED All rights reserved. Bluesound International, Bluesound Professional, Bluesound, the stylized wordmark and “B” logotype and all other Bluesound product names and taglines are trademarks or registered trademarks of Bluesound International, a division of Lenbrook Industries Limited.
Need help?
Do you have a question about the B400S and is the answer not in the manual?
Questions and answers