Elkay EZ Series Installation, Care & Use Manual
Versatile bottle filling stations & coolers
Hide thumbs
Also See for EZ Series:
- Installation, care & use manual (18 pages) ,
- Installation & use manual (10 pages) ,
- Installation, care & use manual (22 pages)
Advertisement
Quick Links
EZSTLG8WS*1B
LZSTLG8WS*1B
Buy at
| 855-558-9600 | BottleFillingStations.com
INSTALLATION, CARE & USE MANUAL
Manual de Instalación, Cuidado y Utilización
Manuel d'installation/entretien/utilisation
EZ
& LZ™ Series Versatile Bottle Filling Stations & Coolers
™
EZ™ & LZ™ Serie versatil Botella Bombas y Enfriadores
EZ™ & LZ™ Stations versatile de Remplissage de Bouteille Série et Refroidisseurs
*Versatile Cooler Model LZSTLG8WSLK
alternate installations
*Versatile Cooler Model LZSTLG8WSLK
configuration as shippe
*Versatile cooler design allows units to be
installed either left-hand high and right-hand low
or left-low and right high.
Basin change may be required. See desired
rough-in to help determine if the basin change is
necessary.
Page 1
1000001714 (Rev. G - 06/16)
Advertisement
Need help?
Do you have a question about the EZ Series and is the answer not in the manual?
Questions and answers
The fountain has to much pressure and is shooting water over the drain. How do I adjust the pressure or turn it down
To adjust the water pressure on an Elkay EZ Series fountain:
1. Locate the adjustment screw in the right knee clearance area.
2. Turn the screw clockwise (CW) to raise the stream height.
3. Turn the screw counterclockwise (CCW) to lower the stream height.
4. The factory setting is for 35 PSI, and the ideal stream height should hit the basin about 6-1/2" (165 mm) from the bubbler on the downward slope.
This answer is automatically generated