Advertisement
Audio Output Connection
There are two kinds of audio outputs on the back of the receiver:
•
Balanced output of channels 1~4: Low-impedance MIC level.
•
Unbalanced output of channels 1~4 (mixed): High-impedance LINE level / Low-impedance MIC level. Switchable
between MIC and LINE levels.
Use shielded audio cable for the connection between the receiver and the amplifier/mixer. If the amplifier/mixer has
a 1/4"(6.3mm) phone jack, connect a cable from the 1/4"(6.3mm) unbalanced audio output from the receiver to the
amplifier/mixer. If the amplifier/mixer has an XLR input, connect a cable from the balanced XLR audio output from the
receiver to the amplifier/mixer input.
OPERATION MANUAL V1.0
M4000
PAGE 3
Advertisement
