Bosch GKS 190 Professional Original Instructions Manual page 8

8 | English
(24) Clamping lever for cutting depth preselection
(25) Cutting depth scale
(26) Wing bolt for mitre/bevel angle preselection
Technical data
Hand-held circular saw
Article number
Rated power input
No-load speed
Max. cutting depth
– at a 0° mitre/bevel angle
– at a 45° mitre/bevel angle
Spindle lock
Base plate dimensions
Max. saw blade diameter
Min. saw blade diameter
Max. base blade thickness
Locating bore
Weight according to EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Fitting
Only use saw blades the maximum permitted speed of
u
which is higher than the no-load speed of the power
tool.
Inserting/changing the circular saw blade
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Wear protective gloves when fitting the saw blade.
u
Danger of injury when touching the saw blade.
Only use saw blades that match the specifications
u
given in this operating manual and on the power tool.
Only use saw blades the maximum permitted speed of
u
which is higher than the no-load speed of the power
tool.
Do not use abrasive wheels as the application tool un-
u
der any circumstances.
1 609 92A 4SX | (03.12.2018)
(27) Pair of screw clamps
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
B) Commercially available (not included in the scope of deliv-
ery)
GKS 190
Professional
3 601 F23 04. 3 601 F23 0B.
3 601 F23 08.
3 601 F23 0C.
3 601 F23 0K.
3 601 F23 0L.
W 1400
-1
min 5500
mm 67
mm 49
●
mm 302 x 140
mm 190
mm 184
mm 2.0
mm 20
kg 4.1
/ II
Selecting the saw blade
You will find an overview of recommended saw blades at the
end of these operating instructions.
Removing the saw blade (see figure A)
To change tools, we recommend that you place the power
tool down on the front side of the motor housing.
– Press and hold the spindle lock button (4).
Do not press the spindle lock button (4) while the saw
u
spindle is moving. The power tool may become damaged
if this happens.
– Use the hex key (17) to undo the clamping bolt (18) in ro-
tational direction ➊.
– Swing the retracting blade guard (11) back and hold on
to it firmly.
– Remove the clamping flange (19) and the saw blade (20)
from the saw spindle (22).
Fitting the saw blade (see figure A)
To change tools, we recommend that you place the power
tool down on the front side of the motor housing.
B)
GKS 190 GKS 190
Professional Professional
3 601 F23 09.
1400 1400
5500 5500
67 67
49 49
●
302 x 140 302 x 140
190 190
184 184
2.0 2.0
19 16
4.1 4.1
/ II / II
Bosch Power Tools
●