Advertisement
2. Product Instructions
2.1 von-S2(JTGM-1100) installation
von-S2(JTBT-2200) installation is following below order.
1. von-STD(JTGM-1100) installation requires after vehicle parking in safety area.
** Caution : A side brake or foot brake should be locked and shift also checked on the parking position.
2. Please check vehicle engine should be off when if ignition on
3.
von-S2(JTGM-1100) shall be installed in front of driver seat and must be located to ensure a separation distance of 20cm or
more between the antenna and the driver/passenger to comply with FCC RF exposure requirements.
4.
Check the position of vehicle OBD diagnostic connector.
8
[Vehicle OBD
diagnostic Connector]
Min
20cm
Advertisement
