2. Product Instructions
2.3 von-S2(JTGM-1100) module separation
** Caution : von-S2(JTGM-1100) module separation should be performed at safety area after parking.
** Caution : The separation from vehicle is prohibited if not the purpose of driving data saving or transmitting.
** Caution : Performing von-S2(JTGM-1100) module separation on ignition on may be caused to data loss or module damaged.
1. Turn vehicle ignition off.
2. Pull von-S2(JTGM-1100) module from vehicle OBD diagnostic Cable then separating it.
9
This confidential information is not supposed to disclosed and misused to the third party