Adding Priority Mark(S) - Priority Mark Function - Sony ICD-BP120 Primary Operating Instructions Manual

Adding Priority Mark(s)
— Priority Mark Function
Usually the recorded messages are lined up in the order of recording.
By adding priority marks ( ) to important messages, you can renumber
the messages in the order of their priority. You can add up to three priority
marks with "
NxPLAY/STOP
A-B REPEAT/PRIORITY
To add priority mark(s) in the stop mode
1
Select the message you want to mark.
2
Press A-B REPEAT/PRIORITY for more
than 1 second.
" " and the message number flash.
3
Press A-B REPEAT/PRIORITY repeatedly
to select the number of priority mark(s)
while " " and the message number are
flashing.
The setting is finished when the priority
mark(s) light(s) steadily in the display
window and the messages are renumbered.
30
" being the most important.
./>
xSTOP