Hyundai Kona User Manual page 72

Solutions
Before reporting a malfunctioning system, refer to the following table and see if you can identify and fix the problem. If the problem
persists or you are unable to locate your specific need, contact your place of purchase or dealer.
Sound and display
Symptom
No sound
Sound is heard from only one
speaker.
Sound is cut off or a distorted
noise is heard.
7-2
Possible cause
System turned off
Low volume level
System muted
Unbalanced sound output
System vibration
AUX cable connected without
an external device
Solution
• Ensure that the engine start/stop button is set to "ACC" or
"ON."
• Press the [PWR] button to turn on the system.
Turn the [VOL] knob on the control panel to adjust the volume.
Press the [ ] button on the steering wheel to unmute the system.
On the Home screen, touch All Menus > Setup > Sound > Position
and change the settings to adjust the sound balance.
It is not a malfunction. If the system vibrates, the sound may be
cut off or a distorted noise may occur. When the vibration stops,
the system will operate normally.
If the AUX cable is plugged into the system without an external
device, a distorted noise may occur. Remove the AUX cable from
the AUX port when an external device is not connected.