Next steps
1
Replace the
battery
2
Replace the
base cover
3
Replace the
SD memory card
4
Follow the procedure in
Display assembly
Removing the display assembly
Prerequisites
1
Follow the procedure in
2
Remove the
SD memory card
3
Remove the
base cover
4
Remove the
battery
5
Remove the
WLAN
6
Remove the
hard drive assembly
Steps
1
Peel off the tape securing the wireless antenna from the system board [1].
2
Open the latch and disconnect the display cable from the system board [2].
3
Unroute the display cable from the routing guides on the palmrest and keyboard assembly [3, 4].
after working inside your computer
before working inside your computer
Removing and installing components
53