Next steps
1
Replace the
hard drive assembly
2
Replace the
battery
3
Replace the
base cover
4
Replace the
SD memory card
5
Follow the procedure in
Heat sink
Removing the heatsink - UMA
Prerequisites
1
Follow the procedure in
2
Remove the
SD memory card
3
Remove the
base cover
4
Remove the
battery
5
Remove the
hard drive assembly
6
Remove the
system fan
Steps
1
Loosen the four captive screws that secure the heatsink to the system board [1].
NOTE:
Loosen the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heatsink.
2
Lift the heatsink off the system board [2].
38
Removing and installing components
after working inside your computer
before working inside your computer