Dialup Monitor; Static Ip And Dynamic Dns Monitor - Fortinet FortiGate FortiGate-500 Administration Manual

Monitor

Dialup monitor

Static IP and dynamic DNS monitor

262
To establish or take down a VPN tunnel
1 Go to VPN > IPSEC > Monitor.
2 In the list of tunnels, select the Bring down tunnel or Bring up tunnel button in the row
that corresponds to the tunnel that you want to bring down or up.
Note: If you take down an active tunnel while a dialup client such as FortiClient is still
connected, FortiClient will continue to show the tunnel connected and idle. The dialup client
must disconnect before another tunnel can be initiated.
The dialup monitor lists status information for all active dialup VPN tunnels. The
number of tunnels on the list changes as dialup users connect and disconnect from
the FortiGate unit.
Figure 131:Dialup Monitor
Flush dialup
tunnels icon
Name
Remote gateway The IP address and UDP port of the dialup remote gateway.
Username
Timeout
Proxy ID Source The IP address range that the dialup user can connect to.
Proxy ID
Destination
Bring down
tunnel icon
The static IP and dynamic DNS monitor provides information about VPN connections
to remote static and dynamic DNS IP addresses. You can use this list to view status
and IP addressing information for each tunnel configuration.
Stop all dialup tunnels and stop the traffic passing through all dialup tunnels.
Dialup users may have to re-connect to establish new VPN sessions.
The name of the phase 2 for the dialup tunnel followed by the number of the
dialup tunnel. For example, if there are 4 dialup tunnels running that use a
phase 2 configuration named Dial_tunnel, the dialup tunnels would be
named Dial_tunnel_1, Dial_tunnel_2, and Dial_tunnel_3.
The XAUTH user name if XAUTH is enabled for the VPN tunnel. See
"Configuring XAuth" on page
The time before the next key exchange. The time is calculated by
subtracting the time elapsed since the last key exchange from the keylife.
The IP address range from which the dialup user can connect. This is
usually the current IP address of the dialup user's computer.
Stop the current dialup tunnel. The dialup user may have to reconnect to
establish a new VPN session.
01-28006-0007-20041105
253.
VPN
Fortinet Inc.