User-Defined Interface Connections - Fortinet FortiGate FortiGate-500 Installation Manual

NAT/Route mode installation

User-defined interface connections

FortiGate-500 Installation Guide
Figure 9: FortiGate-500 NAT/Route mode connections
Internal Network
Hub or Switch
Internal
Esc Enter
FortiGate-500
To connect to FortiGate-500 user-defined interfaces
1 Connect the user-defined interface to the hub or switch connected to the intended
network.
2 Repeat for all user-defined interfaces that you have configured.
The example in Figure 10
interface 1 and an external network connected to user-defined interface 4.
DMZ
INTERNAL EXTERNAL DMZ HA 1 2 3 4 5 6 7 8
External
Public Switch
or Router
Internet
shows an internal network connected to user-defined
01-28004-0023-20040830
Connecting the FortiGate unit to the network(s)
DMZ Network
Web Server
Mail Server
37