Audi RS 3 LMS DSG User Manual page 47


Contact Audi Sport and send it for service when the recommended service mileage is reached.
VAQ
Oil level check cap
How to change the VAQ oil:

To replace the oil is recommended to disassemble the unit from the car.

Open the level check cap, drain it and close it again.

Measure the quantity and put in the same quantity.

If it is done mounted on the car the last 100 ml are not possible to add from the cap (see the picture
below). These last 100 ml must be added through the venting pipe on the engine bay.
Notes:

In case of disassembling the unit from the car, the unit must be positioned in vertical position, as it
is shown in the picture above, to avoid oil leakages.
Fuel tank
The 100l FIA FT3 fuel tank is working with one unique fuel pump and a Venturi hoses system. The pump is
controlled through a PWM fuel control module.
Refuelling tool:
The fuel tank is served with a FIA approved fast coupling plug. The socket is the necessary connecting-tool
for refuelling the tank. This part is available on the Spare Parts Catalogue.
Torque Remarks
15 Nm Change every time
47