Panasonic KX-TGP600 Quick Start Manual page 5

Step 5: Removing the Stand
• Tilt the stand in the direction indicated while pushing the PUSH marks with both hands.
Step 5: Set up the included KX-UDT131 Cordless Phone (to be used if you have purchased the
additional KX-UDT131 cordless Phone)
• Open the battery cover and insert the battery, close the cover.
• Connect the AC adapter to the charger (phone cradle) and a power socket.
• Complete the charging cycle by replacing the cordless phone in the charger for 6 hours –
you may choose to complete the charging cycle when you have completed the set up.
Step 6: Activate your TIPT service (this can only be performed from the KX-UDT65 Desk phone)
• Select Menu
• Select ID – Enter details and select OK.
• Select Password – Enter details and select OK.
• Press the Back button x 3 to return to the main display and complete the activation
process.
• The status indicator on the base unit will flash as follows:
a) Solid – Red: The status indicator will flash solid red for ~20 seconds.
b) Slow flashing – Amber: Next, the status indicator will flash amber for ~50 seconds.
c) Solid – Green: If the configuration is correct, the status indicator will flash solid green.
Quick Tip
Q: Where can I find my Authentication ID and Password?
A: Your ID and Password will be sent to you via email. If you choose to use an additional KX-TPA60 or KX-UDT131 cordless
phone(s) you do not require an authentication ID or Password – these details are displayed as NULL.
Q: I am still unable to connect successfully, what do I do?
A: Check that you have entered the correct ID and Password by repeating the Step 3. Next, restart the system by
disconnecting and reconnecting the base unit from the power supply. Failing this, call the TIPT Help Desk on
116.
Page 5
> System Settings > System Settings > Authentication
1800 648