Advertisement
Quick Links
The GigRig Ltd
Unit 85 Basepoint Business Centre
Swindon
SN5 7EX
TM
The GigRig
Isolator
The GigRig Isolator works as part of our Modular Power Supply and will provide ultra
clean and isolated power to your lower current 9V DC pedals. What's more the
Isolator will provide reverse isolation, so crosstalk between the powered pedal and
other pedals is eliminated. Each Isolator has 4 x independent, isolated, 9V DC outputs
capable of delivering 135 mA each. Use The GigRig Generator, connected to a
Distributor, to power your Isolator.
Instructions for use:
Each Isolator is supplied with 4 x 1.5 metre length DC leads with right angled 2.1mm
connectors to power your effects and 1 metre of cable wrap to keep your leads tidy
once installed. Simply follow the instructions listed in the diagram provided to
correctly connect them.
Please note, we cannot guarantee the performance of the adapter from any other
supply.
DO NOT STRIP THE CABLE.
DO NOT COVER THE ADAPTER, IT MAY OVERHEAT AND SWITCH OFF!
It is normal for the adapter to run warm.
The GigRig Isolator is designed for indoor use. (Just don't get it wet!).
Short Circuit Protection:
The Isolator will sense if there is a short circuit on its output
and shut down to protect itself and your pedals.
Fully compliant with RoHS√ (lead free product.)
Advertisement
Summary of Contents for GigRig Isolator
- Page 1 Distributor, to power your Isolator. Instructions for use: Each Isolator is supplied with 4 x 1.5 metre length DC leads with right angled 2.1mm connectors to power your effects and 1 metre of cable wrap to keep your leads tidy once installed.
- Page 2 Warranty: The GigRig warrants the product to be free from defects in material and workmanship for a period of 2 years from the original date of purchase. If the product fails within the warranty period, The GigRig will repair or, at our discretion, replace the product and cover the cost of return shipping to the original purchaser.