Table of Contents
Advertisement
Quick Links
eFlow4NV Series
Power Supply/Chargers
Models Include:
eFlow4NV/eFlow4NXV
- 4A @ 12VDC or 24VDC Output
eFlow4N8V/eFlow4NX8V
- 4A @ 12VDC or 24VDC
- Eight (8) Fused Outputs
eFlow4N8DV/eFlow4NX8DV
- 4A @ 12VDC or 24VDC
- Eight (8) PTC Outputs
Installation Guide
Rev. 4NVRP052213
Installing Company: _______________ Service Rep. Name: __________________________________
Address: _____________________________________________ Phone #: __________________
More than just power.
TM
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Altronix eFlow4NV
Summary of Contents for Altronix eFlow4NV
- Page 1 Series Power Supply/Chargers Models Include: eFlow4NV/eFlow4NXV - 4A @ 12VDC or 24VDC Output eFlow4N8V/eFlow4NX8V - 4A @ 12VDC or 24VDC - Eight (8) Fused Outputs eFlow4N8DV/eFlow4NX8DV - 4A @ 12VDC or 24VDC - Eight (8) PTC Outputs Installation Guide More than just power.
- Page 2 Overview: Altronix eFlow4NV power supply/chargers convert a 220VAC (working range 198VAC - 256VAC), 50/60Hz to a 12VDC or 24VDC nominal output (see Power Supply Configuration Reference Chart and Specifications). eFlow4NV Series Power Supply Configuration Reference Chart: Nominal DC Outputs [DC]...
-
Page 3: Specifications
4. Measure output voltage before connecting devices. This helps avoiding potential damage. 5. Connect devices to be powered: a. For eFlow4NV/eFlow4NXV connect devices to terminals marked [– DC +] (Fig. 1h, pg. 5). b. For other Power Distribution Models connect devices to be powered to terminal pairs 1 to 8 marked [1P &... -
Page 4: Maintenance
[Trigger EOL Shutdown] (Fig. 1e, pg. 5). 12. For Access Control Applications: mount tamper switch (Altronix Model TS112 or equivalent) at the top of the enclosure. Slide tamper switch bracket onto the edge or the enclosure approx. 2” from the right side (Fig. -
Page 5: Terminal Identification
Power Distribution Module Terminal Legend Function/Description PD8/PD8CB 1P to 8P Positive DC power outputs. 1N to 8N Negative DC power outputs. Fig. 1 - eFlow4NV Board configuration 7.5A 7.5A 32V 5A 250V 5A 250V BAT FAIL AC FAIL AC DELAY SHUTDOWN 1 min. - Page 6 1N-8N Common Outputs (Factory Installed) Fig. 3b - PD8CB- Power Distribution Board FUSED POWER OUTPUTS INPUT COMMON POWER OUTPUTS DC Output to devices From Power Supply 1P-8P Power Outputs, Board 1N-8N Common Outputs (Factory Installed) - 6 - eFlow4NV Series Installation Guide...
- Page 7 Fig. 4 - eFlow4NV Configuration Enclosure Edge of Enclosure Tamper Switch (included) To Access Control Panel or UL Listed Reporting Device Ground PD8/ 220VAC PD8CB power mains Switch Detail DC Output Switch On - 12V Switch Off - 24V Devices (refer to Battery &...
- Page 8 Distribution (power- limited) DC Outputs (power-limited) Battery Connections (non power-limited) Fig. 5a Incorrect Wire Correct Wire Handling Handling External Jacketed Shield Wire Insulation Pull back Solid Copper external jacketed Conductors shield approx. 1/2”. - 8 - eFlow4NV Series Installation Guide...
- Page 9 Keep power-limited wiring separate from non power-limited. Use minimum 0.25" spacing. 12AH Rechargeable batteries are the largest batteries that can fit in this enclosure. A UL listed external battery enclosure must be used if using 40AH or 65AH batteries. eFlow4NV Series Installation Guide - 9 -...
- Page 10 Distribution (power-limited) DC Output (power- limited) Battery Connections (non power-limited) Fig. 7a Incorrect Wire Correct Wire Handling Handling External Jacketed Shield Wire Insulation Pull back Solid Copper external jacketed Conductors shield approx. 1/2”. - 10 - eFlow4NV Series Installation Guide...
- Page 11 (30.5mm) 0.75” 0.75” 12.5” (317.5mm) 1.20” 1.20” (19.1mm) (19.1mm) (30.5mm) (30.5mm) 11.0” (279.4mm) 0.9375” (23.8mm) 1.40” 1.40” (35.6mm) (35.6mm) 0.9375” (23.8mm) 3.25” (82.6mm) 3.25” (82.6mm) 1.0” (25.4mm) 1.0” 1.0” 10.5” (266.7mm) (25.4mm) (25.4mm) eFlow4NV Series Installation Guide - 11 -...
- Page 12 (31.8mm) 1.1” (27.9mm) 1.1” (27.9mm) 1.375” 1.5” 1.5” (34.9mm) (38.1mm) (38.1mm) 1.125” (28.6mm) 2.0” (50.8mm) 2.0” (50.8mm) 1.25” (31.8mm) 1.25” (31.8mm) 1.1” (27.9mm) 1.75” (44.5mm) 1.5” 1.5” 4.615” (117.2mm) 4.615” (117.2mm) (38.1mm) (38.1mm) - 12 - eFlow4NV Series Installation Guide...
-
Page 13: Appendix A - Ul Listed Compatible Devices
Appendix A - UL Listed Compatible Devices –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– A.1 Four (4) Wire Smoke Detectors Table A-1 below lists four (4) wire smoke detectors compatible with eFlow4NV output. System Sensor Smoke Max Stand-by Alarm Current Detector Type Detector/Base Current (mA) (mA) - Page 14 - UL Listed in the U.S. and Canada. - Local or remote control of up to (2) two Altronix eFlow power output(s) via LAN and/or WAN. - Monitor real time diagnostics: DC output voltage, output current, AC & battery status/service, input trigger state change, output state change and unit temperature.
- Page 15 Notes: Altronix is not responsible for any typographical errors. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty IIeFlow4NV Series G22U MEMBER eFlow4NV Series Installation Guide...
- Page 16 3.5A 730mV eFlow4NXV, eFlow4NX8V, eFlow4NX8DV Overview: he eFlow4NV series power supply/chargers convert a 220VAC, 50/60Hz input to a 12VDC or 24VDC output. Stand-by Specifications: Burg. Applications Fire Applications 4 hr. Stand-by/ 24 hr. Stand-by/ Access Control Battery 15 min. Alarm 5 min.
Need help?
Do you have a question about the eFlow4NV and is the answer not in the manual?
Questions and answers