Updating The Ips Signatures From The Cli; Scheduling Antivirus And Ips Updates - Fortinet FortiGate FortiGate-1000 Install Manual

Configuring the FortiGate unit
1
2
3
1
2
1
2
3
FortiGate-200, FortiGate-300, FortiGate-400, FortiGate-500 and FortiGate-1000 FortiOS 3.0 MR4 Install Guide
01-30004-0267-20070215
To update antivirus definitions and IPS signatures
Go to System > Maintenance > FortiGuard Center.
Select the blue arrow for AntiVirus and IPS Downloads to expand the options.
Select Update Now to update the antivirus definitions.
If the connection to the FDN is successful, the web-based manager displays a
message similar to the following:
Your update request has been sent. Your database will
be updated in a few minutes. Please check your update
page for the status of the update.
After a few minutes, if an update is available, the System FortiGuard Center page
lists new version information for antivirus definitions. The System Status page
also displays new dates and version numbers for the antivirus definitions.
Messages are recorded to the event log indicating whether the update was
successful or not.
Note: Updating antivirus definitions can cause a very short disruption in traffic currently
being scanned while the FortiGuard unit applies the new signature database. Schedule
updates when traffic is light, for example overnight, to minimize any disruption.

Updating the IPS signatures from the CLI

Note: You can only update antivirus definitions from the web-based manager.
To update IPS signatures using the CLI
Log into the CLI.
Enter the following CLI command:
configure system autoupdate ips
set accept-recommended-settings enable
end

Scheduling antivirus and IPS updates

You can schedule regular, automatic updates of antivirus and IPS signatures,
either from the web-based manager or the CLI.
To enable schedule updates from the web-based manager
Go to System > Maintenance > FortiGuard Center.
Select the Scheduled Update check box.
Select one of the following to check for and download updates.
Every Once every 1 to 23 hours. Select the number of hours and
minutes between each update request.
Daily Once a day. You can specify the time of day to check for updates.
Weekly Once a week. You can specify the day of the week and time of day
to check for updates.
Next steps
49