Using The Bridge; Use As A Root Device - LG musicflow H4 Portable Owner's Manual

Using the Bridge

Bridge (R1) extends a range of use of speakers.
Please purchase it separately if you want to use.
Use as a root device (wired to
the home router)
If there is no speaker with wired
connection to the router
When your home router is located too far from any
speaker location that is to be connected via wired
mode, connect the Bridge (R1) to your home
router with LAN cable.
1. Attach the power cord to the power port on
the rear of the Bridge (R1) and then plug the
power cord into an electrical outlet.
2. The power LED on the front of Bridge (R1)
turns on. On your smart device, select the Music
Flow Player app. Tap the
Bridge (R1)
button.
3. Select the [Add Speaker] on the side menu.
4. Select the [Bridge] and tap [Next] on the screen.
5. Following the instruction on Music Flow Player
app, connect the Bridge (R1) and the router
with LAN cable.
Wait a moment until
stops blinking and stays white.
Bridge (R1)
And then select [Next].
Connecting 23
Network status LED
2