Sony XPERIA XZ Instruction Manual page 37

Saving battery life (Battery
Care)
Battery Care is a function that learns your
charging habit (time zone for connecting to
charging equipment long) to adjust charging
speed and keep battery performance better
so as to extend battery life.
Starting "Battery Care" function
■
It predicts the time when charging
equipment will be disconnected by learned
charging habit and adjusts charging speed
so that the battery become fully charged at
the time.
After start of charging with Battery Care,
charging pauses once short of full charge.
And then charging resumes near estimated
full charge time to be on time for full charge
Switching normal charging
■
From the Home screen,
･
u
[Settings]
u
Tap to turn off Battery Care.
To stop Battery Care charging temporarily
･
to switch to normal charging, drag the
status bar down
Battery Care].
❖ Note
It may take 7 days or more to complete learning your
･
habit.
u u
[Battery] [Battery Care]
u
Tap [Charging with
If regularity in your charging habit cannot be found,
･
Battery Care does not start because incomplete of
the learning and normal charging will be performed.
If you remove charging equipment during Battery
･
Care charging, the terminal may not be fully charged.
Charging with desktop holder
To charge the battery using the Desktop
Holder SO27 (optional) and AC Adapter 06
(optional), operate the following steps.
Depending on the thickness of the terminal,
･
please install the attachment that was
included with the desktop holder before
charging. Placing the terminal on the desktop
holder without the attachment on it may
damage the USB Type-C jack or other parts.
When you do not attach a commercially
･
available case or cover to the terminal, attach
the Attachment 52B (P.36) to the desktop
holder to use.
Insert a Type-C plug of the AC
1
adapter into the charging jack on
the back of the desktop holder.
Desktop holder
Before Using the Terminal
Charging jack
Type-C plug
35