Sony XPERIA XZ Instruction Manual page 158

❖ Information
Depending on your environment, the connection
･
speed may be slow, or Wi-Fi may not be available.
When the terminal is connected to Wi-Fi network
･
successfully, "Connected" appears. When a different
message appears, make sure the password (security
key).
When the connection is not established even if you
enter a correct password (security key), the correct IP
address may not have been acquired. Check the
signal status and reconnect. It may take 5 minutes or
more to display the connection result after
connecting to Wi-Fi network is operated.
If you connect to an access point that is not
･
connected to the Internet,
communication may be performed via mobile
network, not via Wi-Fi.
To use docomo services via Wi-Fi, you need to set up
･
your d ACCOUNT. From the Home screen,
u
[Settings] [docomo service/cloud]
(d ACCOUNT setting)] to set.
定
Deleting connecting Wi-Fi network
setting
From the Home screen,
1
u
[Settings]
Tap the Wi-Fi network that is
2
currently connected.
[FORGET].
3
appears and
u
u
[d
アカウント設
u
[Wi-Fi].
Adding a Wi-Fi network manually
Turn Wi-Fi on beforehand (P.155).
･
From the Home screen,
1
u
[Settings]
u
[Add network]
2
name (SSID) of the Wi-Fi network
you want to add.
Tap "Security" setting item
3
security type of the Wi-Fi network
you want to add.
4 options, "None", "WEP", "WPA/WPA2
･
PSK", or "802.1x EAP", appear.
If required, enter security
4
information for the Wi-Fi network
you want to add.
[SAVE].
5
Using optional menu
From the Home screen,
1
u
[Settings]
Add network
Saved networks
Refresh
u
[Wi-Fi].
u
Enter the
u
Tap a
u u
[Wi-Fi] Tap .
P.156
Display saved Wi-Fi
networks.
P.155
Settings
156