Quick Start Label Symbols - Champion 100414 Operator's Manual

100414 - 2000W PORTABLE INVERTER GENERATOR

Quick Start Label Symbols

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
Starting the Engine

Move generator outside and far away from windows,
doors and intake ventilation covers.
1. Check oil level.
Recommended oil is 5W-30.
2. Check gasoline level.
When adding gasoline, use a minimum octane rating of 87
and an ethanol content of 10% or less by volume.
3. Turn the fuel cap vent lever to the "ON" position.
4. Turn EZ Start dial counterclockwise to the full "CHOKE"
position.
5. Pull the recoil cord.
6. Turn the EZ Start dial to the "RUN" position.
7. Plug in desired device.
1 2 3 4
5W-30
DANGER
3mm corner radius; 2mm safe margin; white to be
printed shown in 50% process magenta
This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
5 6 7
Stopping the Engine
LPN 2783-L-OP Colors
Rev B
W
Size 256 x 48 mm 1. Turn off and unplug all connected electrical loads. K CG1 376 152 186
Artwork Notes Revision Changes
B-Changed choke direction
2. Turn the EZ Start dial to the "STOP" position.
10
IMPORTANT SAfETY INSTRUCTIONS
1 2