Mini CONVERTIBLE Owner's Manual page 46

Hide thumbs Also See for CONVERTIBLE:
Table of Contents

Advertisement

CONTROLS
Opening from the inside
With the vehicle stationary, press the
button in the driver's floor area.
Closing
To close the tailgate, swivel it upwards and
press it closed.
Trunk emergency unlocking
Pull the handle inside the cargo area.
The tailgate unlocks.
Personal Profile
Concept
Via Personal Profiles, individual settings for sev‐
eral drivers can be stored and called up again
when required.
General information
There are three driver profiles with which per‐
sonal vehicle settings can be stored. Every re‐
mote control has one of these driver profiles
assigned.
If the vehicle is unlocked using a remote con‐
trol, the assigned personal driver profile will be
activated. All settings stored in the driver profile
are automatically applied.
If several drivers use their own remote control,
the vehicle will adjust the personal settings dur‐
ing unlocking. These settings are also restored,
46
Opening and closing
Online Edition for Part no. 01402983394 - X/17
if the vehicle has been used in the meantime
by a person with a different remote control.
Changes to the settings are automatically
stored in the driver profile currently activated.
If another driver profile is selected via the Cen‐
tral Information Display (CID), the settings
stored in it will be applied automatically. The
new driver profile is assigned to the remote
control currently used.
There is an additional guest profile available
that is not assigned to any remote control: it
can be used to apply settings in the vehicle
without changing the personal driver profiles.
Functional requirements
For the system to be able to identify the driver
profile associated to a particular driver, the de‐
tected remote control must be clearly allocated
to the driver.
This is the case when:
The driver is only carrying his or her own re‐
mote control.
The driver unlocks the vehicle.
The driver gets into the vehicle through the
driver's door.
Settings
The settings for the following systems and func‐
tions are stored in the active profile. The scope
of storable settings depends on country and
equipment.
Unlocking and locking.
Lights.
Radio.
Instrument cluster.
Programmable memory buttons.
Volumes, tone.
Control Display.
Climate control.
Navigation.
PDC Park Distance Control.

Advertisement

Table of Contents
loading

Table of Contents