Mini CONVERTIBLE Owner's Manual page 121

WARNING
Improperly executed work can lead to
failure, malfunction or unintentional triggering
of the system. In the case of a malfunction, the
system might not trigger as intended even if
there is an accident severe enough to warrant
it. There is a risk of injuries or danger to life.
Have the system checked, repaired, dismantled
and scrapped by a dealer's service center or
another qualified service center or repair
shop.◀
WARNING
After triggering or damage, system func‐
tionality is limited or not available anymore.
There is a risk of injuries or danger to life.
Have the system checked and replaced by a
dealer's service center or another qualified
service center or repair shop in the event of
triggering of or damage to the
WARNING
With an extended rollover protection sys‐
tem, the area of movement of the convertible
top is limited. There is a risk of injury or risk of
damage to property. When the rollover protec‐
tion system is extended, do not move the
convertible top.◀
Overview
Covers of the rollover protection system
system.◀
Online Edition for Part no. 01402983394 - X/17
Safety
Malfunction
A Check Control message is displayed
when there is a malfunction.
Tire Pressure Monitor
TPM
Concept
The system monitors tire inflation pressure in
the four mounted tires. The system warns you if
there is a significant loss of pressure in one or
more tires.
General information
Sensors in the tire valves measure the tire infla‐
tion pressure and, depending on the model,
the tire temperature.
With use of the system follow further informa‐
tion found under Tire inflation pressure, refer to
page 202.
Functional requirements
The following conditions must be met for the
system; otherwise, reliable flagging of a loss of
tire inflation pressure is not assured:
▷ After a tire or wheel replacement, a reset
was performed with the correct tire infla‐
tion pressure.
▷ After the tire inflation pressure was ad‐
justed to a new value, a reset was per‐
formed.
▷ Wheels with TPM wheel electronics.
Status display
Current status
The system status can be displayed on the Con‐
trol Display, e.g., whether or not the system is
active.
CONTROLS
121