AEG KMK561000M User Manual page 15

7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press or to set the hours.
2. Press to confirm and switch to set
the minutes.
The display shows
hour. "00" flashes.
3. Press or to set the current
minutes.
4. Press to confirm or the set time of
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day flashes in the display.
7.3 Setting the DURATION
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press
or to set the minutes and
the hours for DURATION time.
4. Press to confirm.
When the time ends an acoustic signal
sounds for 2 minutes.
setting flash in the display. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
7.4 Setting the END
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or to set the hours and
the minutes for END time.
4. Press to confirm.
At the set time an acoustic signal sounds
for 2 minutes. and time setting flash
in the display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
6. Turn the knob for the oven functions
and
7.5 Setting the TIME DELAY
function
1. Set an oven function.
2. Press
and the set
3. Press
4. Press
5. Press
6. Press
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
time an acoustic signal sounds for 2
minutes.
display. The appliance deactivates.
7. Press any button to stop the acoustic
8. Turn the knob for the oven functions
7.6 Setting the MINUTE
MINDER
and time
1. Press
2. Press
3. Set the hours.
4. The MINUTE MINDER starts
5. When the set time ends, an acoustic
signal.
to the off position.
again and again until
starts to flash.
or to set the minutes and
the hours for DURATION time.
to confirm. The display
shows flashing .
or to set the hours and
the minutes for END time.
to confirm.
and time setting flash in the
signal.
to the off position.
again and again until
"00" flash in the display.
or to set the MINUTE
MINDER.
First you set the seconds, then the
minutes.
When the time you set is longer than
60 minutes, flash in the display.
automatically after 5 seconds.
After 90% of the set time, an acoustic
signal sounds.
signal sounds for 2 minutes. "00:00"
and flash in the display. Press any
button to stop the acoustic signal.
ENGLISH 15
and