Table of Contents
Advertisement
Safety and operating instructions
Conformity which is delivered with the machine
for more information.
Noise level label
WA
xxx
dB
The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.
Overheating hazard label
The machine may overheat if the cooling air inlet is
covered. This can cause serious damage to the
machine and/or the operator. Never block or cover
the cooling air inlet.
Warning label
To reduce the risk of injury, everyone using,
installing, repairing, maintaining, changing
accessories on, or working near this tool must read
and understand the safety instructions before
performing any such task.
Operate with chisel retainer in place.
12
Emission compliance label
xxxxx.xxxxxx
xxxx-xx-xx
Emissions compliance period referred to on the
label indicates the number of operating hours for
which the engine has been shown to meet Federal
emissions requirements.
Transport
WARNING Fuel hazard
The fuel (petrol and oil) is extremely flammable
and petrol fumes can explode when ignited,
causing serious injury or death.
Empty the tank before transport.
►
Installation
Fuel
Environmental petrol
We recommend the use of premixed alkylate or
environmental petrol mixed with two-stroke oil 2%
(50:1).
NOTICE
The machine is equipped with a two-
stroke engine and must always be run using a
mixture of petrol and two-stroke oil. It is important
to accurately measure the amount of oil to be
mixed to ensure that the correct mixture is
obtained.
Two-stroke oil
The fuel is petrol with a 2% oil mixture (one part oil
to 50 parts petrol).
For the best lubricating results use Atlas Copco's
environmentally friendly two-stroke oil, which has
been specially developed for Atlas Copco's petrol
engined hammering and rock-drilling machines.
If Atlas Copco's two-stroke oil is not available, use
a high quality two-stroke oil for air-cooled engines
(not two-stroke oil for outboard engines). Contact
your local Atlas Copco representative for advice on
the correct two-stroke oil.
© Atlas Copco Airpower | 9800 1629 01 | 2018-01-01
COBRA TTe
xxxx
Original instructions
Hide quick links:
Advertisement
Table of Contents
