Troubleshooting - JVC KD-X252 Instruction Manual

REFERENCES
Change the display information
Each time you press , the display information changes.
• If the information is unavailable or not recorded, "NO TEXT", "NO NAME", or other
information (eg. station name) appears or display will be blank.
Source name Display information
FM or AM Frequency Clock
(For FM Radio Data System stations only)
Station name (PS)/Program type (PTY)
Radio text+ title/Radio text+ artist
beginning)
USB (For MP3/WMA/WAV/FLAC files)
Song title/Artist
Playing time Clock
iPod or When [HEAD MODE]/[AUTO MODE] is selected ( 8):
ANDROID Song title/Artist
to the beginning)
PANDORA Station name Shared/Radio
Playing time Clock
AUX AUX Clock (back to the beginning)
(back to the beginning)
Radio text Radio text+
Frequency Clock (back to the
Album name/Artist Folder name File name
(back to the beginning)
Album name/Artist Playing time Clock
Song title Artist name
(back to the beginning)

TROUBLESHOOTING

Symptom
Sound cannot be heard.
"MISWIRING CHECK
WIRING THEN PWR ON"
appears.
"PROTECTING SEND
SERVICE" appears.
Source cannot be selected.
• Radio reception is poor.
• Static noise while
listening to the radio.
Playback order is not as
intended.
Elapsed playing time is not
(back
correct.
"NOT SUPPORT" appears
Album name
and file skips.
"READING" keeps flashing. • Do not use too many hierarchical levels and folders.
"CANNOT PLAY" flashes
and/or connected device
cannot be detected.
The iPod/iPhone does not
turn on or does not work
Correct characters are not
displayed.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. ( 4)
Connect the antenna firmly.
The playback order is determined by the file name .
This depends on the recording process earlier.
Check whether the file is a playable format. ( 14)
• Reattach the USB device.
• Check whether the connected device is compatible with
this unit and ensure the files are in supported formats.
( 14)
• Reattach the device.
• Check the connection between this unit and iPod/
iPhone.
• Disconnect and reset the iPod/iPhone using hard reset.
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
( 5), some characters may not be displayed
correctly.
ENGLISH
15