Table of Contents
Advertisement
APPENDIX
Insert the bobbin case so that the mark on the
g
bobbin case aligns with the ● mark on the machine.
• Align the and ● marks.
• Make sure that the indicated points are aligned
before installing the bobbin case.
CAUTION
● Never use a bobbin case that is scratched, otherwise
the upper thread may become tangled, the needle
may break or sewing performance may suffer. For a
new bobbin case (part code: XE7560-001), contact
your nearest authorized service center.
● Make sure that you fit the bobbin case properly,
otherwise the needle may break.
h
As shown, insert the tab on the needle plate
cover into the hole in the needle plate, and then
correctly position of the needle plate cover.
a Needle plate cover
b Tab
c Hole
• Check that the needle plate cover is flush with
the top surface of the machine.
www.SewingSupplyWarehouse.com
58
i
● If the needle plate cover is not flush with the
a Bobbin case
b mark
c ● mark
TROUBLESHOOTING
If the machine stops operating correctly, check the
following possible problems before requesting service.
You can solve most problems by yourself. If you need
additional help, the Brother Solutions Center offers the
latest FAQs and troubleshooting tips. Visit us at " http://
support.brother.com/ " .
If the problem persists, contact your dealer or the
nearest authorized service center.
Frequent troubleshooting topics
Detailed causes and remedies for common
troubleshooting topics are described below. Be sure to
refer to this before contacting us.
■ Upper thread tightened up
■ Tangled thread on wrong side of
fabric
■ Incorrect thread tension
■ Fabric is caught in the machine and
cannot be removed
From the front, slide the needle plate cover back
into position.
a Needle plate cover
CAUTION
surface of the machine as shown below, remove
the needle plate cover (step
h
i
it again (steps
and
). Sewing while the
needle plate cover is not flush with the surface
of the machine may cause the needle plate
cover to come off of the machine, resulting in
injuries if your fingers touch the race.
d
), and then install
page 59
page 59
page 59
page 60
- Quick Links:
- Knowing Your Sewing Machine
Hide quick links:
Advertisement
Table of Contents
