Bella 550 BR Owner's Manual page 154

32
29. Electrical system
The fuses fitted in Bella boats are so-called automatic fuses, which can be reactivated after overload
by pressing the toggle that has flipped downwards. Do not alter the rated amps of the fuses or install
any electrical components exceeding the rated current of the circuit.
If you leave the craft for a longer time, disconnect the power with the main switch. Cut the power when
carrying out any electrical installations.
When you remove or install batteries, do not touch both poles simultaneously with metallic items. Do
not touch the positive pole and metallic boat hull simultaneously.
Charge the batteries only with the charger supplied or with another, with similar capacity. Over-
charging may cause an explosion.
CAUTION!
Do not block the ventilation pipes of the batteries.
CAUTION!
Never disconnect the power using the main switch when the engine is running.
Do not modify the craft's electrical systems or drawings. Installations, alterations and
maintenance should be carried out by a skilled marine electrician. All installations and alterations
should be properly documented and to be approved with manufacturer. Without proper documentation,
manufacturer has all rights to discontinue the warranty.