Alphason Finewoods Series Assembly Instructions

IMPORTANT INFORMATION!

1) Before starting assembly please take time to familiarise yourself with the instructions and the
components listed on the back page, as this product could be unstable if incorrectly installed.
2) Do not place hot or cold items against or in close proximity to any glass surface unless an
adequately thick insulating material is used to prevent such items coming into contact with the glass.
3) Do not strike the glass with hard or pointed items.
4) When cleaning glass panels use a damp cloth or leather with washing up liquid or soft soap if necessary;
do not use washing powders or other substances containing abrasives as these may scratch the glass.
5) Do not sit or stand upon horizontal glass surfaces.
6) In order to maintain a high quality finish, when cleaning wooden panels please use a soft cloth with a
suitable furniture polish if required.
7) Alphason Designs uses real wood veneers, consequently slight colour and pattern variation may occur and
does not indicate a product defect. With natural wood, exposure to direct sunlight can produce colour
change and should be avoided. Any slight change in colour over time does not indicate a product defect.
Please Note:
Total maximum load for this support must not exceed 120Kg
This support must be assembled in accordance with these assembly instructions.
Maximum load for top panel is 80Kg. Maximum load for each glass shelf is 50kg.
Alphason Designs Ltd. accepts no liability for any damage caused through incorrect or inappropriate use of this audio visual support.
Alphason Designs Limited
Alphason House, Bolton Road, Atherton, Greater Manchester M46 9AW UK
Tel: +44 (0)1942 885600
Fax: +44 (0)1942 876955
info@alphasondesigns.com
www.alphasondesigns.com
Finewoods
MODEL: FW1350
AV SUPPORT
ASSEMBLY INSTRUCTIONS
S E R I E S
issue
01 04/08