Table of Contents
Advertisement
• Use another web browser or computer to log in again.
• Reset the router to factory default settings and try again. If login still fails, please
contact the technical support.
Note: You'll need to reconfigure the router to surf the internet once the router is reset.
Q4. How do I use the WDS Bridging function to extend my wireless
network?
For
example, my house covers a large area. The wireless coverage of the router I'm
using (the root router) is limited. I want to use an extended router to extend the wireless
network of the root router.
Note:
•
WDS bridging only requires configuration on the extended router.
•
WDS bridging function can be enabled either in 2.4GHz frequency or 5GHz frequency for a dual-band router. We use
the WDS bridging function in 2.4GHz frequency as example.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Configure the IP address of the router:
1 ) Go to
Advanced
router to be in the same subnet with the root router; (For example, the IP address
>
Network
> LAN, configure the IP address of the extended
86
Advertisement
Table of Contents
