Table Of Contents; Overview - Bosch MSM64...GB seriesMSM66...GB series Instruction Manual

en
Safety instructions
Do not place the power cord over sharp edges or hot surfaces.
Never immerse the base unit in liquids and do not clean in the dish-
washer. Do not use the hand blender with damp hands and do not
operate it at no load. Do not immerse the appliance in liquid above
the blender foot-base unit connection point.
W Risk of injury!
Immediately after using the appliance, wait for the blade in the
blender foot to come to a standstill. Do not attach or remove tools
until the appliance is at a standstill. Switch off the appliance and
disconnect from supply before changing accessories or approaching
parts that move in use. Never grip the blade in the blender foot.
Never clean the blades with bare hands. Use a brush.
W Risk of scalding!
Caution when processing hot liquids. Liquids may splash during pro-
cessing. Never place blender foot on hot surfaces or use in very hot
food. Leave hot food to cool down to at least 80 °C before process-
ing with the blender! Before using the hand blender in a cooking pot,
take the pot off the hotplate.
W Risk of suffocation!
Do not allow children to play with packaging material.
W Important!
It is essential to clean the appliance thoroughly after each use or
after it has not been used for an extended period. X "Cleaning" see
page 5
Congratulations on the purchase of
your new Bosch appliance. You can find
further information about our products
on our web page.
Contents
Intended use . ..............................................3
Safety instructions ......................................3
Overview.....................................................4
Operation . ...................................................5
Cleaning .....................................................5
Recipes and tips .........................................6
Disposal . .....................................................6
Guarantee...................................................6
4
These operating instructions refer to various
models. An overview of the different models
can be found on the illustrated pages
(Fig. C).

Overview

Please fold out the illustrated pages.
X Fig. A
1 Base unit
2 Power cord
3 ON button
a Normal speed
b Turbo speed
The hand blender remains switched
on as long as the On button (a or b)
is pressed. The turbo speed is used
for the universal cutter (if included in
delivery).