i
nStallation
n
C
etwork
02
&
onneCtion
10
11
11
11
Installation
precautions
Install the camera in a location with a good Wi-Fi signal and no interference.
1.
Keep it away from humidity such as around the humidifier.
2.
Keep it away from direct sunlight, strong light or dust; install it in a place with
3.
clear view.
Do not install it in a place where there are a lot of obstacles.
4.
Keep the lens clean at all times.
5.
Wipe off the dust with a soft cloth.
installing on the wall and ceiling using screws
9
Remove the rubber packing attached to the
1.
camera stand.
9
9
Take out the screws (M3xL20) and anchors
2.
(Φ5x25mm).
when installing on a wooden wall
Fix the bracket to the wall using screws, as
3.
shown in the next image. Using a Phillips
screwdriver, fasten screws in 2 screw holes on
the wall on which the camera is to be installed.
02
9