Network Connection And Settings; Network Connection And Settings; Precautions; Connection Using The Wi-Fi Direct Function - Samsung SMARTCAM SNH-V6431BN User Manual

Network Connection and Settings

precautions

• The wireless network access may fail, depending on the communications
environment.
• For details about the network settings and password, contact your network
administrator or service provider.
• For a specific Internet service requiring user authentication, you may not access
the service. If this is the case, contact the service provider.
• Do not access the unauthorized network.
• The farther the distance from the Wireless Access Point, the longer time the
network connection may take.
• If you fail to access the selected wireless network, try a different Wireless
Access Point to make access.
• For more information about the router or the wireless connection, refer to the
documentation of the router or contact the router manufacturer.
• If the camera is connected to a multiple-Wireless Access Point network
environment, some video packets may be lost, depending on the network traffic
load.
• According to the network policy (blocking UDP) of the service provider, the video
transmission can be limited to 7 minutes.
For more details, refer to the descriptions on page 18, <relay Mode>.
• In addition to the above two situations, you may encounter a network delay or
interruption due to the network conditions.
• Some hubs can have compatibility issues.

Connection using the wi-Fi direct function

What is Wi-Fi Direct?
Using Wi-Fi Direct, you can easily connect your camera to a router without a
cable.
When the power is connected, the power status LED lights up in red and
1.
starts blinking when boot-up is complete.
Press and hold the Wi-Fi Direct button on the camera for 5 seconds, and the
2.
color of the LED will change to yellow/orange.
Wi-Fi Direct Button
<Wireless Router>
Register and select a camera, referring to the instructions in the mobile guide.
3.
When the camera connects the server, the LED turns green.
4.
Set up the wireless network environment in accordance with the <wireless
5.
network> guidance on page. 20~21.
The camera can only be registered via mobile.
`
n
You can connect in relay mode if the router doesn't have UPnP.
`
Configuration may differ depending on the router model. Please refer to the router
manual.
Please contact the service provider if you have difficulty connecting to the Internet.
`
02
Mobile
11