Ricoh SP 320DN/SP User Manual page 60

4. Configuring the Machine Using Utilities
• [Communication Mode]
[Infrastructure] is selected by default. Therefore, connect the machine to a wireless router
or access point.
• [Authentication]
Select an authentication method.
• [WPA2-PSK]
• [Mixed Mode WPA/WPA2]
• [Encryption]
Select an encryption method.
• [None]
• [WEP]
• [Wi-Fi Direct Settings]
• [SSID]
Enter the SSID name. Can contain 32 characters.
[Google Cloud] tab
• [Google Cloud Print]
58
When this is selected, communication will be encrypted with CCMP (AES). Enter a
value in [WPA Passphrase] that contains from 8 to 64 characters.
When this is selected, communication will be encrypted with TKIP/AES. Enter a
value in [WPA Passphrase] that contains from 8 to 64 characters.
When it is selected, communication will not be secured by encryption.
When it is selected, communication will be encrypted in WEP (Wired Equivalent
Privacy).
Specify [WEP Key Length], [WEP Transmit Key ID], and [WEP Key Format] and
enter [WEP Key]. The following table shows the number and types of characters
you can enter, depending on the key settings.
WEP key length is 64 bits
WEP format is
Hex
WEP key max
10 characters
length
WEP key
0–9, A–F, a–
valid
f
characters
WEP key length is 128 bits
WEP format is WEP format is
ASCII Hex
5 characters 26 characters
0–9, A–F, a–
0x20–0x7e
f
WEP format is
ASCII
13 characters
0x20–0x7e