Operating The Speed Control; Optional Attachments - KitchenAid 5KSM125 Instruction Manual

USING THE STAND MIXER

OPERATING THE SPEED CONTROL

NOTE: The Stand Mixer may warm up during use. Under heavy loads with extended
mixing time, the top of the unit may become hot. This is normal.
Plug Stand Mixer into proper
electrical outlet. Always set speed
control lever on lowest speed to
1
start, then gradually increase speed
to avoid splashing ingredients. See
"Speed control guide" chart.

OPTIONAL ATTACHMENTS

KitchenAid offers a wide range of optional attachments such as food grinders or
pasta makers. They may be attached to the Stand Mixer attachment power shaft,
as shown here.
To attach: Turn speed control
1
to "0". Unplug Stand Mixer.
16 | USING THE STAND MIXER
Do not scrape bowl while Stand Mixer
is operating. The bowl and beater are
designed to provide thorough mixing
2
without frequent scraping. Scraping
the bowl once or twice during mixing
is usually sufficient.
Loosen attachment knob by turning
2
it counterclockwise. Remove
attachment hub cover.