Table of Contents
Advertisement
FIREPOWER FP 95 FC
2.05 Specifications
Minimum Mains Circuit to suit factory fitted Plug &
Maximum Mains Circuit to suit factory fitted Plug &
∆
The recommended time delay fuse or circuit breaker size is 20 amp. An individual branch circuit capable of carrying 30 am-
peres and protected by fuses or circuit breaker is recommended for this application. Fuse size is based on not more than 200 percent
of the rated input amperage of the welding power source (Based on Article 630, National Electrical Code)
Firepower continuously strives to produce the best product possible and therefore reserves the right to change, improve or revise the
specifications or design of this or any product without prior notice. Such updates or changes do not entitle the buyer of equipment
previously sold or shipped to the corresponding changes, updates, improvements or replacement of such items.
The values specified in the table above are optimal values, your values may differ. Individual equipment may differ from the above spec-
ifications due to in part, but not exclusively, to any one or more of the following; variations or changes in manufactured components,
installation location and conditions and local power grid supply conditions.
Manual 0-5122
Description
Package System Part Number
Power Source Weight
Power Source Dimensions HxWxD
Number of Phases
Frequency
Flexible Supply Cable Size
Supply Lead Plug Type
Nominal Input Voltage
Rated Input Current
Rated kVA @ 100% Duty Cycle
Rated Input Current
Maximum Input Current
Generator Requirements
98145.4519
Open Circuit Voltage Range
Output Current Range
Duty Cycle Period
Number of Output Voltage Values
Lead (Weld Current @ Duty Cycle)
Lead (Weld Current @ Duty Cycle)
Wire Size Range (Flux Core)
Table 2-1: System Specifications
Firepower FP 95 FC
1444-0322
37.15 lb ( 16.8 kg)
14"x7"x15"
(355.6 x 177.8 x 381mm)
1 Ø
60Hz
7 ft (2.25 m) 14AWG
5-15P
120V AC
15A
1.2kVA
15A (60A@20%)
28A (85A@17%)
98145.4519
# 3.4kVA
15 – 27V
23 – 90A
10 Minutes
2
(+) 15A (60A@20%)
(+) 28A (85A@17%)
.023" - .030"
(0.6 - 0.8mm)
2-2
INTRODUCTION
Introduction
Advertisement
Table of Contents
