ACP XpressChef 3i Quick Start Manual

Quick Start Guide
Refer to Product Safety Manual for Safety Statements. Complete Owner's Manual available online
A
D
Oven Operation
Turn the Oven On, Preheat
This oven can be set to a preheat
temperature between 200°F (95°C) and
520°F (270°C).
1. Oven must be plugged in.
(Screen will power on to "Standby mode" within
approximately 30 seconds.)
2. Touch the green power icon
3. The preheat temperature of the oven
will appear in the display.
Touch the power key again to interrupt
preheating, or touch the blue menu icon to
access main menu and user options.
Cooking with Preprogrammed Menu Items
1. After oven has preheated to desired temperature, open oven door,
place food in oven and close door
2. Scroll to choose desired food item from menu and touch the food
item you wish to cook. The cook cycle will begin and screen will show
remaining cook time.
Note: If "Preheat Warning" is enabled (customized user setting) and
preheat temperature differs from default preheat temperature, the control
will interrupt cook cycle.
3. At the end of the cooking cycle, the oven beeps, and displays animation.
Use oven mitts and/or paddle to carefully remove food from oven.
©2019 ACP, Inc.
Cedar Rapids, IA 52404
|
XpressChef™ 3i High Speed Commercial Oven
Oven Clearances
A. Allow at least 2" (5.1 cm) of clearance around top of
B
B. There is not an installation clearance requirement for
C
C. Allow at least 1/2" (1.27 cm) of clearance around sides
D. Install oven so oven bottom is at least 3 feet (91.5 cm)
For full product documentation visit:
www.acpsolutions.com
1
oven. Proper air flow around oven cools electrical
components. With restricted air flow, oven may not
operate properly and life of electrical parts is reduced.
the back of the oven.
of oven.
above floor.
Care and Cleaning Basics
Refer to Owner's Manual for complete instructions and
recommendations (available online)
DO
wear protective gloves and glasses
DO
always use recommended cleaning supplies:
Damp towel, plastic scouring pad, ACP Oven Cleaner (CL10)
and ACP Oven Shield Protectant (SH10).
DO
allow oven and tools to cool before cleaning
DO NOT
use caustic cleaning products
DO NOT use water pressure style cleaning systems
DO NOT spray cleaning solution into perforations.
Part No. 20217606
Original Instructions