Switching Feeding Modes (Adf -> Sadf) - Toshiba e-STUDIO 2000AC Copying Manual

Switching Feeding Modes (ADF -> SADF)
0.
You can switch the feeding mode when the ADF is used, from "ADF" to "SADF". The paper feeding mode has 2 types as
follows:
 ADF (Continuous feed mode): Feeds originals continuously when you press the [START] button on the control
panel while originals are being placed on the ADF. This is useful when you make more than one copy in one
operation. (Default setting)
 SADF (Single feed mode): Feeds originals one by one automatically. This is useful when you usually only have 1
original.
When the single feed mode (SADF) is set, place originals one sheet at a time. If you place more than one original, the
copied image may be skewed or the originals may misfeed.
Press [ADF -> SADF] on the Edit menu.
1
Press [OK].
2
The feeding mode is now set at "single feed mode".
102 Switching Feeding Modes (ADF -> SADF)